Top » Catalog » PressTips » Dampeners » Roller Damaged By Backing

$0.00

Never Rotate Kompac Without Seals!
[Roller Damaged By Backing]

Never Rotate Kompac Without Seals!
Seal Backing Plates hold the Kompac Seals securely inplace by spring pressure.

Compression springs press seals against form roll ends under constant pressure.

When seals are removed for cleaning or replacement steel backing plates press on ends of Form Roll.

If press is powered with seals removed the form roll will be damaged.

Attached photo shows form roll end damaged due to rubbing against steel backing plate under power.

Reviews
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Manufacturers
Categories
BigFoot Sucker Tube Sets (5)
Kompac Automatic Dampeners-> (29)
Kompac IV Products (2)
Kompac Repair & Rebuilding (2)
Kompac TechTips (2)
MONTHLY SPECIALS (3)
PressTips-> (39)
  Dampeners (15)
  Impression Pressure (2)
  Ink (2)
  Inking System (2)
  Paper Delivery (3)
  Paper Feed (4)
  Plate To Blanket Pressure
  Polyester CtPtP (4)
  Press Productivity (6)
  Pressroom Consumables (1)
  Sheet Register
SUCKER FEET (1)
SYN-TAC PRESS ROLLERS (8)
Undersize Blankets (5)
WILL CALL (1)
ABDick Press Parts & Accessorie (16)
Fountain Control Systems (12)
Komori Kompac (2)
Kompac Gear-Clutch Assemblies-> (34)
Kompac II Parts and Consumables-> (28)
Kompac Kwik Koat
Kompac Repair Parts-> (24)
Kompac Rollers-> (78)
ATF/Gestetner Products (16)
Kompac III Parts and Consumables (47)
Ryobi/Itek Products (22)
Toko/Multi Products (24)
Hamada Products (3)
Archive-> (1)
What's New?
#92930 Gear/Clutch Assembly
#92930 Gear/Clutch Assembly
$0.00
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
Shopping Cart
13 x 092777 Low-Profile Fountain Bottle
10 x GST12
11 x GST11-KM
9 x 33R51P Water Metering Roller for "H" Water System
10 x A92777 Low Profile Bottle & Cap Assembly
14 x Press Vacuum Test Gauge
12 x GST11
9 x 10.75x19&3/8 Slim Blanket
8 x Removing Defective 12MM Clutch/Bearing
7 x 98750 nozzle bracket assy
9 x PM-98955 AB DICK Universal Table Crank
8 x 24 Pack Kompac ll Cleaning Seals
12 x AF15G
8 x Press Vacuum Test Gauge
8 x 30X Pocket MicroScope
5 x 34H-K2 Heidelberg Quickmaster 8 roll soft ink kit - 2nd Unit
12 x AF15-KM
4 x 12MM Clutch/Bearing Press Kit
2 x #092760 Dispenser Valve Assembly
1 x #092771 Calibrated Fountain Bottle
6 x #90860 Gear Assembly
1 x 93346 Kolormate Oscillator
4 x #92720, 23 & 1/4\" Form Roller
1 x #92450, 10 & 5/8" Form Roll W/Bearings
5 x #92491 Wave Washer
4 x #90840 AD 500/506 FORM ROLLER W/ BEARINGS
6 x #92420, 11 & 1/8" Metering Roll W/Bearings
4 x #92870 Gear/Clutch Assembly
5 x #92880 Gear/Clutch Assembly
3 x #090973, 13 1/4" Form Roller W/Bearings
2 x #94770 Form Roll W/Bearings
5 x #92530, 11 1/2" Form Roll W/Bearings
6 x V-97051 Kompac Vac KV-100
1 x BF-1034 Big Foot Sucker Tube for Ryobi
9 x AF17-KM
2 x 96241 HMD6112-KM
7 x #92430, 11 & 1/8" Form Roller W/Bearings
4 x #91900, 13 1/4" Form Roll W/Bearings
2 x #92410, 11" Form Roll W/Bearings
8 x Single Unit BigFoot Sucker Tubes
5 x #92550, 12 11/32" Form Roll W/Bearings
5 x #92860 Gear/Clutch Assembly
6 x #94760, 13" Form Roll W/Bearings
3 x #95827 Form Roll W/Bearings
2 x 91308, 23 1/4" Long Travel Oscillator
4 x #92580 Metering Roller W/Bearings
2 x #98555 Form Roll W/Bearings
4 x #92860 Gear/Clutch Assembly
4 x 91111 Cam Follower
2 x 96520 Kolormate 20 Oscillator Kit
4 x Ryobi / Itek Old-Style Sucker Tubes
3 x 91303, 11 1/2" Kolormate Oscillator
2 x 92778 Blue Suction Syringe
4 x QM-46 BigFoot Sucker Tubes
3 x #91420 Metering Roller W/Bearings
2 x Kompac Running Too Wet
2 x 16MM Clutch/Bearing Press Kit
1 x Installing Replacement 12MM Clutch/Bearing
4 x #93286 Form Roll W/Bearings
2 x 95871 Kolormate Oscillator
1 x 96460 Kolormate 25 Oscillator Kit
1 x AF17
4 x MULTI 1860-1850N SUCKER TUBES
1 x 96540 Kolormate 40 Oscillator Kit
1 x #91990 Gear/Clutch Assembly
1 x #93347 Gear/Clutch Assembly
3 x AF17G-KM
3 x #93121, 18 & 3/8" Form Roller W/Bearings
2 x 10.75X16.75 Spot Blanket
3 x AF15
1 x Long neck Squeeze Bottle
2 x #98545 Metering Roller W/Bearings
2 x T-500 T-51 bottle and cap assembly
3 x #92470, 13" Form Roller W/Bearings
2 x Ryobi / Itek New Style Sucker Tubes
2 x #092765 "O"
3 x 92370 One Set Kompac II Seals
1 x Use Velcro Strip To Stop Stock
4 x #92810 Gear/Clutch Assembly
3 x #92693 Form Roll Without Bearings
1 x 91302, 11" Long Travel Oscillator
1 x P-98597 AB Dick 9800 series clutch assy.
3 x AF15G-KM
1 x BF-1005 AB DICK SET OF 4 BIG FOOT SUCKER TUBES
2 x 33R40 Water Form Roller "H" Water System
1 x #92930 Gear/Clutch Assembly
1 x #90959 Gear/Clutch Assembly
1 x #91966 Spacer Washer
2 x #98912 Form Roll
1 x V-94081 LH MTG. BRACKET
1 x GST13-KM
3 x Single Purchase BigFoot Sucker Tubes
1 x 8.38x19.38 Slim Blanket
3 x BigFoot Suckers Tubes-Multi 1250 Old Style (w/brackets)
1 x #92540, 12 11/32" Metering Roller W/Bearings
3 x 34H-K1 Heidelberg Quickmaster 46 7-roll soft ink kit 1st Unit
2 x #94250, 13 1/4" Form Roll W/Bearings
2 x KOM-25
2 x #98727 Form Roll W/Bearings
1 x 90910 LH BRKT ASSY. ABD 9800
1 x V-93545 BOLT
1 x 2.0x4.0 Spot Blanket
1 x CHIEF 15-17 SUCKER TUBES
2 x RYB334
2 x #92144, 11 5/8" Form Roll W/Bearings
1 x GTO46-K 9-Roll Soft Ink Roller Kit for Heidelberg GTO-46
1 x V-91802 Screw for backing plate tab
1 x 73488-5 AB DICK CLUTCH SPRINGS 5-PACK
1 x 8.25x19&3/8 Slim Blanket
3 x #92890 Gear/Clutch Assembly
2 x AF17G
1 x 93805 BOLT RETAINER ASSY.
2 x #92830 Gear/Clutch Assembly
1 x 91910 COLLAR
1 x LIT-WUB16
1 x 91309, 18 3/8" Kolormate Oscillator
1 x 93818 ECC. SHAFT BUSHING
1 x #91405 Gear Assembly
1 x 91470 Kolormate Oscillator
1 x KOM-25 Recirculator Module
1 x BF-1006 CHIEF 15/17
1 x 91304, 12 11/32" Kolormate Oscillator
1 x #92920 Gear/Clutch Assembly
1 x #95500, Form Roll W/Bearings
1 x 10.75x19&3/8 Slim Blanket
1 x #92850 Gear/Clutch Assembly
1 x #95410 Form Roll W/Bearings
1 x #98519 Gear Assembly
1 x 92691 Cover Nut
1 x #92800 Gear/Clutch Assembly
3 x 32R-K Soft Ink Roller Kit for Ryobi 3302/Itek 3985
1 x 9985 & 3985 Service Manuals
1 x #92040, 18 3/8" Form Roll W/Bearings
1 x GTO52-K 9-Roll soft ink roller kit for GTO 52
1 x 91301, 10 5/8" Long Travel Oscillator
1 x #95522 Gear Assembly
1 x 91315 Kolormate Oscillator
2 x MULTI 1850 SUCKER TUBES
1 x Ink Roller Maintenance
1 x 2.0x4.0 Spot Blanket
4 x Using Kompac II KwikVac System
1 x 92370-Ten Set Pack Kompac II Seals
1 x M1316
1 x M1819-1-KM
1 x M2629
1 x 92185 Five Set Pack Kompac II Seals
1 x M125IPC
1 x M1316-KM
1 x TK47
$917.00
Notifications
NotificationsNotify me of updates to Never Rotate Kompac Without Seals!
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Google Buzz Share on Digg
Reviews
Write ReviewWrite a review on this product!

Copyright © 2025 Kompac.com
Powered by osCommerce