$0.00

92180 Ten Set Pack Kompac II Seals
[92180]

92180 Ten Set Pack Kompac II Seals
#092180 Ten pair package Kompac II Seals.

Tech Tip: The key to superior performance is cleanliness, especially in regard to the sealing system.

Seals should be removed and cleaned at least twice per week with roller wash to remove dried ink, and aper residues.

Seals should be cleaned more frequently if running coursely pigmented or metalic inks.

Using electrostatic fountain solutions, paper and clean-up mats prone to linting or picking, and overspray of thermo and litho powders or grandulated deglazers can induce rapid metering roll seal ring as well as teflon seal wear.

When you reinstall seals after cleaning, wipe a film of petroleum jelly on the form roll end and the metering roll end rings where the seals rub. This will reduce friction and increase seal use-life.

Note: Use felt cleaning seals with a good water misible wash at least once-per-week to reduce form roll end swelling, the primary cause of premature form roller failure.

Swollen form roll ends cause excess nip pressures at Kompac ends, resulting in dry tone at edges of plate/copy.

Reviews
1055 - Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'roger1_kompaccom.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by

select p.products_id, p.products_image from orders_products opa, orders_products opb, orders o, products p where opa.products_id = '164' and opa.orders_id = opb.orders_id and opb.products_id != '164' and opb.products_id = p.products_id and opb.orders_id = o.orders_id and p.products_status = '1' group by p.products_id order by o.date_purchased desc limit 6

[TEP STOP]