Top » Catalog » PressSavers » 0

$0.00

Cleaning & Refreshing Kompac On-The-Fly
[0]

Cleaning & Refreshing Kompac On-The-Fly
The liquid holding capacity of the Kompac causes wetting solution to contaminate faster than dampeners with greater fountain capacity.

On long runs, fountain contamination caused by paper surface sizing, spray powder, and chemical neutrizers collect and concentrate in Kompac wetting solution.

Some papers which are 'too neutral' ( high alkaline) can raise fountain PH from desired 4.5-5.5 to 6.5-7.0 within 1,000 sheets causing dry-tone.

If solution contamination is not removed, image fidelity and ink density can go down hill fast with each succeeding impression.

The solution has been to stop, suck-out the contaminated solution that collects near seals, allow dispenser bottle to replentish fountain, re-wet plate, re-start press and print.

When making a color wash, the routine process of stopping, sucking out ink-solvent waste, disposing of waste, re-applying ink solvent, restarting press wastes valuable press time.

Daily non-productive time required to refresh and clean your Kompac represents many lost hours every month.

*Using TimeSaver Seals in your Kompac II is the solution to this delima!

PressSaver's Kompac TimeSaver Seals have suction holes cut inline with Kompac nip connected to a Squeeze Bulb connected to remoted waste container.

When fountain solution becomes contaminated, just one quick squeeze sucks-out fountain contamination near seals and dispenser bottle automatically replentish solution.

Waste solution passes thru Squeeze Bulb and goes directly into one-gallon waste collection jug behind press, and the press never stops!

When cleaning your ink system, waste ink/solvent automatically sucks-out just as contaminated fountain solution, with just a few quick squeezes of the Kompac SqueezeVac.

When using an ink clean-up blade, TimeSaver Seals allows you to clean press and Kompac at same time without stopping press.

Note: Seal latching springs must be 'slightly' re-formed 1/8" offering clearance for Seal's hose connector.

See/enlarge attached photo to observe spring shape and required hose clearance.

'Kompac TimeSaver Seals' is the trade name of PressSavers, Inc's Patent Pending TimeSaver Seals.

Go to Kompac Vac Category and follow Kompac SqueezeVac to learn about complete Kompac SqueezeVac System.

Reviews
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Manufacturers
2 x AF17G
1 x #91900, 13 1/4" Form Roll W/Bearings
1 x 33R40 Water Form Roller "H" Water System
1 x 3302 & 3985 Service Manuals
2 x 92370 One Set Kompac II Seals
1 x GST12
1 x DMCP Recirculator Module
2 x MULTI 1850 SUCKER TUBES
1 x GST11
1 x 8 Gal Refrigerated LC 4/Color
1 x #91800 Gear/Clutch Assembly
2 x 93818 ECC. SHAFT BUSHING
1 x #092765 "O"
1 x 90850-4 4 Set Pack Kompac III Seals
1 x #92450, 10 & 5/8" Form Roll W/Bearings
1 x MULTI 1860-1850N SUCKER TUBES
1 x GST13
1 x RYB3200W-KM
1 x 91424 Oscillator Block RH
2 x GESTETNER SUCKER TUBES
1 x RYB3200-KM
1 x RYB522-KM
1 x #92800 Gear/Clutch Assembly
1 x RYB5102-KM
1 x AF15G-KM
1 x #90860 Gear Assembly
1 x #90969 Gear/Clutch Assembly
1 x 8 Gal Non Refrigerated 1-2 Color
1 x 90756 2.5mm T-Wrench
1 x #92880 Gear/Clutch Assembly
1 x M1316-KM
1 x V-91802 Screw for backing plate tab
1 x RYB522R-KM
1 x RY-332 Kwik Kolor 100-Pkg Ink Fountain Liners
1 x 8 Gal Refrigerated LC 2/Color
1 x 91423 Oscillator Block LH
1 x #92415 Thrust Washer
1 x #91990 Gear/Clutch Assembly
1 x #92910 Gear/Clutch Assembly
1 x 94810-Syntac (92K16) GT52 form roller
1 x RY-332 Kwik Kolor PKG-50 Ink Fountain Liners
1 x KMO-65 Recirculator Module
1 x 95930 COVER ASSEMBLY
1 x #92870 Gear/Clutch Assembly
1 x AF17-KM
1 x M1316IPC-KM
1 x 16 Gal Refrigerated LC 4-6/Color
1 x RYB52-KM
2 x #090973, 13 1/4" Form Roller W/Bearings
1 x #90959 Gear/Clutch Assembly
1 x 90920 RH BRKT ASSY ABD 9800
1 x #92410, 11" Form Roll W/Bearings
1 x RYB-522 Recirculator Module
1 x #92830 Gear/Clutch Assembly
1 x 93805 BOLT RETAINER ASSY.
1 x M125IPC
1 x #92550, 12 11/32" Form Roll W/Bearings
1 x #92420, 11 & 1/8" Metering Roll W/Bearings
1 x #92920 Gear/Clutch Assembly
1 x #92890 Gear/Clutch Assembly
2 x AF17G-KM
1 x M1819-1-KM
1 x #92530, 11 1/2" Form Roll W/Bearings
1 x #94770 Form Roll W/Bearings
1 x #92810 Gear/Clutch Assembly
2 x 91546 Nylon Set Screw M4x6
1 x #94250, 13 1/4" Form Roll W/Bearings
1 x 71-109-05 Astro Envelope Feeder Sheet Separator
1 x #91966 Spacer Washer
1 x #94760, 13" Form Roll W/Bearings
1 x M125ML
1 x V-92491 wave washer
1 x Kwik Kolor RYB-3302 Ink Fountain
1 x 92779 Long Neck Syringe
2 x #92930 Gear/Clutch Assembly
1 x 91545 Compression Spring
1 x GST11-KM
1 x #90840 AD 500/506 FORM ROLLER W/ BEARINGS
1 x M1819-II-KM
1 x RYB332-KM
1 x 91414 tie plate GT-46
1 x 91708 6MM X 30MM SHOULDER SCREW
1 x #91410 Form Roll W/Bearings
1 x 91910 COLLAR
1 x CHIEF 15-17 SUCKER TUBES
1 x LIT-WUB16
1 x 98750 nozzle bracket assy
1 x RYB2728-KM
1 x 34H-K1 Heidelberg Quickmaster 46 7-roll soft ink kit 1st Unit
2 x Press Vacuum Test Gauge
1 x 16 Gal Refrigerated LC 1-3/Color
1 x GTO52-K 9-Roll soft ink roller kit for GTO 52
1 x #92470, 13" Form Roller W/Bearings
1 x 92370-Ten Set Pack Kompac II Seals
1 x BF-1005 AB DICK SET OF 4 BIG FOOT SUCKER TUBES
1 x #92720, 23 & 1/4\" Form Roller
1 x AF15G
1 x #092760 Dispenser Valve Assembly
1 x 92185 Five Set Pack Kompac II Seals
1 x GST13-KM
1 x Li Shiang Wang FEDEX Shipping Charge
2 x M1316IPC
1 x Kwik Kolor RYB-32 Ink Fountain
1 x #92710, 23 & 1/4" Metering Roller W/Bearings
$131.00
Manufacturer Info
PressSavers
Other products
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Google Buzz Share on Digg